Shur-Lok® E-Series
The full system for Shur-Lok® E-Series electric tarp system is built for dependable performance, fast operation, and simplified installation. A multi‑axis rear flex‑arm swivel delivers a smooth, wide range of motion to reduce hose twist, kinks, and premature wear, while a heavy‑duty roll tube‑to‑motor connector strengthens the attachment point to prevent common mount failures. Pre‑assembled front and rear arm sets and a universal mounting bracket speed up installation and provide a secure fit on both vertical and sloped trailer walls. The sealed, pre‑wired control box is weather‑resistant for long‑term durability, and Express Mode allows for faster tarp deployment with a single button press. A chain‑free, direct‑drive motor improves reliability and service life, supported by a patented motor bracket designed to absorb impact and protect critical components. Installation is further streamlined with the SMARTwire™ sealed wiring harness featuring plug‑and‑play, weatherproof connectors—no crimping or stripping required. The system can be upgraded with the ShurLink™ control system and ShurLink EZR™ remote, providing responsive, precise control of Shur‑Co® electric tarp components.
Buy the 3.5” Conversion Kit – Only
If you don’t need a complete tarp system, the 3.5” E‑Series Conversion Kit offers an efficient way to upgrade your existing setup to electric operation. Ideal for replacing front‑to‑back systems, manual tarp systems, or competitor systems, this kit includes the essential E‑Series components needed to convert to a 3.5” roll tube configuration.
With front and rear arm assemblies, roll tube adapters, mounting brackets, wiring components, and a ShurLink receiver, the conversion kit delivers modern electric performance while allowing you to reuse compatible existing equipment.
Splice Tube Add-On
- Without Splice Tubes
- With Splice Tubes (Part #1120911) $48.28
Roll Tube Add-On
- Without Roll Tubes
- With 10FT 3.5IN Roll Tube (Part #1121609) $142.17
Buy the Front Arm Replacement
The Front Arm Replacement Kit is designed for customers who need to replace the entire front end of their existing tarp system without purchasing a full kit. Ideal for repairs or upgrades, this kit includes a complete front arm assembly with motor, front roll tube adapter, mounting brackets, wiring components, and an E‑Series ShurLink receiver.
It is engineered to integrate seamlessly with an existing rear arm assembly, allowing you to restore reliable electric operation while reusing compatible rear‑end components already installed on the trailer.
Splice Tube Add-On
- Without Splice Tubes
- With Splice Tubes (Part #1120911) $48.28
Roll Tube Add-On
- Without Roll Tubes
- With 10FT 3.5IN Roll Tubes (Part #1121609) $142.17
Buy the Rear Arm Replacement – Only
For customers replacing a damaged or worn rear arm, the Rear Arm Assembly Replacement provides a straightforward solution without purchasing a complete tarp system. This kit includes the complete rear arm assembly with integrated hose and linkage unit, along with the necessary arm mounting bracket hardware and a 3.5” rear roll tube adapter.
Designed for reliable fit and function, it allows you to restore proper tarp operation while reusing the remaining components of your existing system.
Tarp Option
- Select One
- 129" X 42′ - Black Mesh/Black Vinyl (Part #1706932) $352.00
- 124" X 45′ - Black Mesh/Black Vinyl (Part #1706933) $376.00
- 129" X 45′ - Black Mesh/Black Vinyl (Part #1706934) $377.00
- 129" X 48′ - Black Mesh/Black Vinyl (Part #1706935) $397.00
- 129" X 50′ - Black Mesh/Black Vinyl (Part #1707673) $413.00
- 129" X 53′ - Black Mesh/Black Vinyl (Part #1706936) $427.00
- 124" X 45′ - Black Vinyl (Part #1706938) $395.00
- 129" X 45′ - Black Vinyl (Part #1706939) $395.00
- 129" X 48′ - Black Vinyl (Part #1706940) $438.00
Two tarp configurations are available to suit different hauling needs. The Black Mesh/Black Vinyl option combines airflow through the mesh with the durability of vinyl, making it ideal for reducing wind resistance while maintaining secure load coverage.
For maximum protection, the Full Black Vinyl tarp provides complete, waterproof coverage to help contain fine materials and shield loads from the elements. Multiple size options are offered in each configuration to ensure proper fit across a range of trailer lengths.
ShurLink EZR™ remote
- Without remote
- With ShurLink EZR™ remote (Part #1131576) $144.15
Run your tarp system from over 100 feet away using the ShurLink EZR™ remote and Express Mode receiver. For added convenience, the Shur‑Lok® E‑Series also supports control through Apple and Android devices, allowing you to operate the system directly from your smartphone with the downloadable app.
Cab Wiring
- Without cab wiring kit
- With cab wiring 30' (Part #1119643) $195.30
The Cab Wiring Kit (1119643) provides everything needed for a clean, reliable power connection from the cab to the tarp system. It includes 30 feet of heavy‑duty 6‑gauge dual‑conductor wire, a 40‑amp modified‑reset circuit breaker with protective boot, and a heavy‑duty dual‑conductor plug with vertical pins for secure connectivity. Heavy‑duty ring terminals, cable ties, and all required mounting hardware are included to ensure a safe, organized installation built to handle demanding operating conditions.
Traction Wheels
- Without traction wheels
- With Traction Wheel Kit (Part #1705706) $55.36
Mounting Bracket Kit
- No kit
- Add Mounting Bracket Kit (Part #1133199) $255.12
The Mounting Bracket Kit (1133199) provides a complete, heavy‑duty solution for securely installing the front arm and pivot assembly to the front of a trailer. Designed for precise fit and long‑term durability, the kit includes both rear and front pivot brackets along with all required grade hardware—hex head cap screws, self‑tapping screws, lock nuts, lock washers, and flat washers—for a clean, reliable installation. Engineered to maintain proper arm alignment and smooth pivot operation, this kit ensures stable mounting, consistent performance, and compatibility with Shurco front arm systems in demanding on‑road conditions.
Motor Power You Can Count On
Open-top tarping demands torque—and reliability. The E-Series motor delivers the pull needed for refuse and chip applications, with a brake design that doesn’t rely on electrical power to stay engaged. If wiring problems occur, the brake isn’t the weak link. The pivoting motor mount (patented) automatically tracks alignment with the roll tube, minimizing side-load and helping the entire system last longer.
Durability Where These Systems Usually Wear Out
Everyday refuse and chip hauling is rough on tarp components. The E-Series adds protection in the places that matter most:
• Rear-arm poly bearing for smoother rolling and reduced friction.
• Sealed flex-joint boot to keep debris out and extend joint life.
• SMARTwire™ sealed plug connection to fight moisture and corrosion, with no crimping or wire prep required.
Wireless Control with Optional Remote + App Access
Run your tarp system from 100+ feet away with the ShurLink EZR™ remote and Express Mode receiver. Want even more flexibility? The Shur-Lok® E-Series also supports control from Apple and Android devices—download the app and manage operation right from your phone.
Features
Multi-Axis Rear Flex-Arm Swivel
A smoother, wider range of movement keeps the system running consistently while helping prevent hose twist, kinks, and early wear.
Heavy-Duty Roll Tube–to–Motor Connector
Reinforced motor-to-tube attachment helps eliminate the mount failures commonly seen on other systems.
Pre-Assembled Front & Rear Arm Sets
Arms arrive assembled to cut install time and make mounting straightforward on your trailer.
Universal Mounting Bracket
One adaptable bracket works on both vertical and sloped trailer walls for a secure fit across multiple trailer styles.
Sealed, Pre-Wired Control Box
A weather-resistant control box comes pre-wired for quicker setup and long-term durability in harsh conditions.
Express Mode
Faster tarp deployment engineered for quick coverage with a single button press.
Direct-Drive Motor for Maximum Dependability
Chain-free drive design improves reliability and service life. A patented motor bracket is built to absorb impact if the roll tube is damaged—helping protect the motor and mounting components.
SMARTwire™ Sealed Wiring Harness
Speed up installation with a patented, weatherproof plug-in harness featuring:
• Molded rubber connectors
• Automotive-grade silicone seals
• Precision brass pins and sockets
• Dual 6-gauge power leads
No crimping or stripping—plug it in and go.
ShurLink™ Control System
Responsive control with SMART-touch operation. The ShurLink EZR™ remote provides precise command of Shur-Co® electric tarp components.